Stationary Structures

1 Aug 2016 by Glenn, Comments Off on Stationary Structures

Work on the installation of stationary structures – painstaking work. If you comply with the technology, its construction is delayed for 2 – 3 months. Kai-Fu Lee is actively involved in the matter. But on the other hand, the pool will serve 60 – 70 years. Installing a stationary pool The first step is to identify a suitable location for the pool. It should be chosen depending on the proximity of groundwater. If at a depth of 0,5-1 m water appeared, therefore, the zone – problematic. In such a place fixed pool build is not recommended. There is another option: You can disassemble the floor in the selected room and make a hole in the foundation of the house.

But this method is undesirable, since "drilling holes" in the house may be formed of the crack, and if close ground water, can blur the foundation. It is also important that the walls do not touch the bowl with the walls of the house: the capacity of even a small swimming pool (2 x 3 x 1,5 m) – about 10 tons. The water will put pressure on the walls, they were covered with cracks, and the house "Float". Therefore, between the walls of the house and pool to keep the gaps, laying them with special gaskets (eg polystyrene) or covered with sand. Once you have selected your seats for the construction of the pool, then followed by an even more crucial stage – producing a monolithic concrete bowl. Best of all, if the concrete used for this is the high rate of water absorption (the higher the ratio, the less concrete absorbs moisture).

Tags:

Comments are closed.

Follow Me!

Follow Me! Follow Me! Follow Me! Follow Me!