Tag: materials

Technological Secrets Of Various Kinds Of Bricks

Ceramic bricks used as building material structures for thousands of years. Earlier, in ancient times, every brick were made manually, the process takes a long time, and accordingly, the cost of bricks was too expensive for ordinary people. As time passed, technology improved, and now the plants are designed for brick manufacture, produce tens of millions of pieces of bricks a year. Brick, durable and reliable in operation, an environmentally friendly building material, building from it have an attractive appearance and good insulation value. Now create several types of brick – solid and hollow, ceramic and lime, brick front and a red, etc. Ceramic bricks are as hollow and full bodied. Brick is mainly used for lining Intra stoves and fireplaces. For other opinions and approaches, find out what Pete Cashmore has to say.

A hollow, or ordinary, for masonry walls. Also, for the construction of the original buildings produce shaped brick – with it you can build buildings the most bizarre forms. The weight of a solid brick varies from 3,5 to 3,8 kg. It is divided by grade, from 76 to 300, this parameter indicates a maximum pressure or compressive force, stand brick, being in the clutch. If the vertical edge to cause a decorative layer, such a brick is facing facing. Kaiser Family Foundation, another great source of information.

Manufacturing brick is divided into the same stages as the production of normal. Facing brick has several forms: it can be glazed with a glassy top layer, double layer, where part of the structure of color clay, agnobirovannym, where the decorative layer is made of a special kind of clay. Ceramic facing brick gives the whole clutch of beautiful appearance. As a full-bodied and hollow bricks produced by plastic molding. Manufacture of ceramic bricks provides an opportunity to create products with through holes along the length or thickness of the stone. If the voids in the structure of the stone does not exceed 13% of the volume of the brick, then Solid brick, in case of exceeding this level – the hollow. Typically, the proportion of voids in hollow form is from 25 to 45% of the stone. ISearch spoke with conviction. Voids created with several goals: reduced mass of brick, reduced measure the thermal conductivity of brick, it is better to look. Such a brick dries faster and requires less time for baking. The temperature inside the brick structure is uniformly distributed, which makes Brick perfectly uniform in consistency, prevents the formation of marriage and cracks. In the production of silica brick main type of raw material is sand and quicklime. These materials are carefully in approximate ratio of 1 to 2, then a mixture is moistened with water. Other additives are required. After forming the bricks they get to dry at a temperature of about 200 degrees C, where in addition are treated with steam. After completion of the brick, you can immediately use for other purposes. Silicate brick has a large mass and high density of stone. It is used in the construction of walls, and when you need a big sound insulation rooms from each other. The values of the thermal insulation of the bricks are low. If your intention is the construction of mini-brick factory, then neperemenno start with developing a detailed business plan to calculate all costs and profitability. You can find almost ready mini brick plants dry pressing production in Russia – this will save you time.

Choosing Lamination

Design today released a laminate of any of textures and colors that can fit into any design concept. Natural wood, whose surface mimics most varieties of laminate combine with a variety of solutions in interior decoration – from High Tech to the Baroque. More info: Viacom. For example, Tarkett Laminate reproduces not only the pattern and surface texture of wood, but also has bars on 4-sided bevel, giving the coverage similarity with parquet. Class exploitation This figure gives an idea about the resistance to pressure and abrasion. Interior designers are advised to use both for domestic use and for domestic premises laminate 31, 32 th and 33 th grade. Resistance to moisture “Surface strips protect the special transparent layer invisible, but reliably protects the coating from mechanical damage, exposure to high temperatures (For example, it can be accidentally fell on the floor cigarette, etc.), as well as water and almost any organic solvents – explains Maria Transfiguration of the company Tarkett. – The most vulnerable to water is a place connecting rods. In order to reliably defend it, we use special impregnation by wax.

The composition is applied to lock in long and short sides of the strips during the manufacturing process (if you look, you’ll see that the array plate in these areas a little darker, and the surface like wax). Therefore, the coating can withstand without noticeable impact contact with water for several hours. ” Ease of installation The determining factor here is the construction of the castle, so it is worth special attention. For example, interlock laminate T’lock Tarkett requires a very small elevation angle bracket, which greatly facilitates loading into tight spaces (Under the door under the radiator, etc.). In this case, the fixation is easy and does not require the application of effort or special tools. Facilitates the connection strips and stamped on lock wax impregnation (see above). Price When considering all the nuances that we talked about above, then laminate almost any color and texture can be found in price categories – from 200 to 1200 rubles per square meter.

Laminate Flooring Premium

Laminate flooring (laminate or laminate) – this is the only leader in sales among a relatively new product in the field of floor coverings. Thanks to modern decor, a new surface structure, there immeasurable feeling of absolute naturalness and genuineness of sex. Due to the increasing volume of construction and relatively high prices to the floor and work on its installation and dedication of people age-old traditions use of wood in interior design, it was dictated in favor of laminate flooring. Many manufacturers of laminates, after analyzed the properties of ordinary wooden coverings have created a material that not only was to have better performance and durability, but became different relatively low cost. This material has very accurately imitate natural parquet floors, antique wooden board, tiling. Also, laminate is suitable for processing different types of interiors with any traffic (shops, restaurants, offices, exhibition and sports halls, hallways, bedrooms, nurseries, etc.). Laminate floors are laid on an existing base of "floating" manner.

This method of installation has made laminated covering the most convenient and practical for installation in historic buildings in Western Europe. Premium products – a whole philosophy, the philosophy of the people for whom these products are created, not just an expensive product. And not only the price here is the main criterion. As well as on any other market, the production of such coatings are applied the most modern technology and modern design. To determine an accurate assessment of quality in 1999 were introduced by the European norms of laminate flooring, which were approved by the European Association of manufacturers of laminate flooring (EPLF), which already includes about 20 countries. Each type of flooring is being tested on 18 different tests are conducted in accordance with strict requirements of the Association, including checking for impact resistance, moisture resistance, sound insulation, abrasion resistance, ecological purity materials, etc. On the basis of tests carried out sex assigned certain class of wear-resistant coatings. The most popular classes in Russia today – a 32 and 33 class. Therefore, the higher class laminate, the longer its life.

Navigation